Digital Incubator

Digital Incubator

Backed by state-of-the-art infrastructure, we are capable in designing and exporting a wide assortment of Digital Incubator which is highly sought after in many industries for determination of biochemical oxygen demand and also for preservation of medicinal vaccines and various chemicals. Fabricated by expert engineers and technicians using cutting edge technology, this Digital Incubator is rugged in construction, compact in size, efficient in performance and have a longer service life. Clients can avail this Digital Incubator from us in varied specifications and at market leading prices.

Specifications:  

• Temperature range: 5.0^oC to 60.0^oC. Accuracy / Uniformity: +0.5^oC/+1^oC

   

• Temperature display: Digital LED 3 ½ digit

   

• Control: Microprocessor based PID control. With Auto tune CE marked

   

• Resolution: 0.1^oC

   

• Temperature sensor: PT – 100

   

• Heating: ‘U’ shaped Nichrome wire heater in SS sheathing

   

• Cooling: CFC free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay

   

• Air circulation: Flange motor with impeller / blower

   

• Construction: Double wall, with insulation, outer door key lockable, inner glass viewing door

   

• Chamber illumination: Fluorescent light with door switch

   

• Safety features

   

• High temperature safety cut off

   

• Electrical overload cut off relay for compressor

   

• Time delay for compressor switch ON

   

• Electrical circuit breaker

   

• Feet: Castor wheels

   

• Trays: SS wire mesh heavy duty

   

• Electrical: 230V / 15A / 50 Hz

   

• Calibration certificate by ERTL – Mumbai with traceability to NPL – New Delhi

   

Pre Installation Mandatory Requirement: (Guarantee void incase of non compliance)

• Room temperature around machine preferably at 25^oC with air conditioning or a well ventilated room with exhaust fan. However surrounding temperature should not exceed 30^oC

   

• Stabilized input voltage of 230V AC 20 Amps. Use of servo controlled stabilizer is recommended

   

STD Model

• Outer cabinet mild steel powder coated

   

• Inner chamber stainless steel 304 grade

   

GMP Model

• Outer cabinet SS 304 grade dull matt finish

   

• Inner chamber stainless steel mirror finish

   

• With DQ, IQ, OQ documentation

   

Technical Specifications

Optional  Extras / Accessories

• PLC based system: PLC with HMI 3.7” touch screen grey monitor with 21 CFR part 11 features (OSLOG) software

   

• Magnetic door lock feature

   

• GSM system: alarms sent to predefined mobile numbers

   

• HMI : 5.7” touch screen grey in lieu of 3.7”

   

• Controller with printer interface to connect to EPSON Dot matrix line printer. Date, time and temperature can be printed whereas print interval can be set between 1 to 99 minutes. (Not supplied with printer)

   

• PC interface for above controller with software on CD & hardware or software with 21 CFR part 11 features

   

• Data logger: 4 point temp. Data logger with sensors placed at specific points in chamber with printer interface and memory

   

• PC interface for above controller  with software on CD & hardware

   

 TemperatureMapping

Digital Incubator: Performance qualification with temperature mapping on site.

Performance validation test consist of one cycle at any one temperature point for 8 hours period. This is done to demonstrate the uniformity of temperature within the chamber is acceptable and that the items within chamber receive a uniform temperature condition.

Data is collected in printed format from up to six different points within the chamber. Temperature uniformity is considered acceptable if the deviation is less +1^oC of set temperature